Honing Machine, Vertical Honing Machine, Machine Tools Manufacturer

Introduction
HONING MACHINES
> HORIZONTAL
> ARIHONE 75 HM / HX
> VERTICAL
> ARIHONE 35 VA
> ARIHONE 50 VA
> ARIHONE 75 VA - SE
> ARIHONE 100 VA
> ARIHONE 150 VA - AG
> ARIHONE 300 VA
> ARIHONE 750 VAPT
> ARIHONE 300 HHM
   x3000 - SE
> ARIHONE 500 HHM
   x5000 - SE
SUPER FINISHING
MACHINES
> ARISUP 50 LT (SH)
> ARISUP 50 LT (DH)
> ARISUP 50 CL
> ARISUP 300TF
> ARISUP 500TF
> ARISUP 800TF
> ARISUP 1200TF
> ARISUP 110 CMS
LAPPING MACHINES
> Bench Type Lapping Machine   Clientele-Installations
Home

Vertical Honing Machine, Machine Tools Manufacturer

VERTICAL HONING MACHINE MODEL - ARIHONE 35 VA

Product Description

Operation:

The honing cycle is fully automatic. The operator has to clamp the component on the table and press the cycle start button. The honing tool rotates, reciprocates and expands and the operation cycle stops after preset time. Different types and grits of stones are used depending upon the material removal and surface finish requirements. This operation improves geometrical accuracies like Taper, Ovality, Roundness and improves Surface Finish by removal of tool chatter marks etc., increasing bearing contact area.

Special Features:

The machines are available in various special features depending on customer’s requirements. They are

Hydraulic Clamping
Auto Plug Gauging
Double Expansion Tool
Hydraulic Expansion
Servo Expansion
PLC/ CNC controls
Index Table etc.
Automatic Centralized Lubrication.

Application

Vertical Honing Machine is to hone heavier components like Hydraulic/ Pneumatic Cylinders, Liners, Diesel Engine Connecting Rods, Hydraulic Valves, Crank Cases, Cylinder Blocks for 2 & 3 Wheelers, Compressor Cylinders, Refrigerator Parts, Steering Pistons, Pneumatic Tools, Gun Barrels etc on batch and mass production basis.

Other Machines:

Manual/ Autostroking Horizontal Honing Machine, Horizontal Pipe Honing Machine, Lapping Machines, Superfinishing Machine. Die Polishing Machines, SPM Honing/ Lapping & Superfinishing machines.

TECHNICAL SPECIFICATION

1. Working Range
a. Type		Vertical
b. Capacity
Diameter range		7 - 35 mm
Length max.		250 mm

2. Spindle Range
a. No. of Spindle		1
b. Speed range RPM		250 – 1500 (in 3 steps)
c. Throat		150 mm
d. Drive		Electric Motor
e. Power		0.5 HP

3. Stroke Drive
a. Stroke length		350 mm
b. Stroking speed		0 - 5 m/min (Infinitely Variable)
c. Drive		Hydraulic Cylinder
d. Power		2 HP

4. Expansion		Hydraulic Cylinder

5. Coolant System		Manual static magnetic separators with paper bag filter 60 LPM. Tank capacity 100 liters

6. Lubrication System		Manual lubrication

7. Hydraulic System
a. Hydraulic tank		50 litres.
b. Pump		Vane Pump

8. Component Clamping		Special fixture with mechanical clamping

9. Electrical Controls
a. Cycle controls		PLC

10. Electrical System		440 Volt , 3 Phase, A.C.

11. Working Table		200 x 150 mm (approx)

12. Machine Dimensions (LxWxH)		1 mtr. X 1.5 mtr x 2.5 mtrs (approx)

13. Weight		1200 Kg. (approx)

CASE STUDY

Model	Component	Size mm	Tol. mm	Taper m	/Ovality m	Surface m	Roughness Ra.	Stock Removal	Prod Per shift
		Pre	Post	Pre	Post	Pre	Post	mm
35 VA	2 wheeler con rods	± 0.010	±0.005	0.010	0.003	2.5	0.20	0.030	900

TOP